Request a quote
Send the details and a few photos of the vehicle. We come back with a price by email or phone, no visit needed.
All quote formsBook an appointment
RecommendedBring the car in. See film samples on your own paint and leave with the coverage, the quote and the dates confirmed. The quickest way to a firm answer.
Book a consultationCall or visit the shop
A call gets the quickest answer. The workshop is open weekdays, Saturday by appointment, and easy to find.
About Vinyl Wrapz · Osborne Park, Perth
A purpose-built wrap and paint protection film workshop in Osborne Park. This page is who we are, where we work and who will be handling your car.
Prefer to talk to a person? (08) 9443 8808
Who we are
We wrap and protect vehicles for private owners, businesses, dealerships and government fleets across Perth. Colour change wraps, paint protection film, vehicle branding and fleet signage, and boat wraps all happen in our Osborne Park workshop, split into a PPF division and a fleet division, with the design and print work handled in-house as well.
It began as a family business and it is still family owned. What has changed is the size of it: a purpose-built workshop of more than 700 square metres, split into two divisions, more than ten vehicles through the bays every week, and specialist installers who each work in the one discipline they are best at. That is what lets us give a single car the same attention as a full fleet.
Want the detail on one service? Each page goes into how the job is done, and the cost guide has real starting prices.
The workshop
This is where your car comes. One division is set up for paint protection film and colour change, the other for fleets, trucks and print, with inspection lighting over every bay and room for more than ten vehicles a week.
01
Paint protection film and colour change, under inspection lighting over every bay.
02
Vehicle branding, fleet signage and the print room, with room for trucks and trailers.
The main bays
Hexagon LED lighting shows every edge and every speck before a car goes back out.
The inspection bay
Finished panels are checked under this light before handover.
Colour change in progress
An Audi RS mid colour change, with the roof film going on under the overhead arm.
On the hoist
Sills and lower panels get wrapped properly on the hoist, not just the flat surfaces.
The studio bay
A RAM pickup in a satin bronze colour flip, photographed under the hex wall.
The fleet bay
Trucks, trailers and fleet vehicles go through the fleet division.
The print room
Branding and livery are printed in-house on our own large-format printer.
Off the printer
Freshly printed film is checked for colour and register before it goes near a vehicle.
PPF templates
Paint protection film templates, cut and weeded, ready to go on the car.
Prep
Trims off, panels masked and the paint decontaminated before any film goes on.
Over 700 square metres, set up for wrapping, protection and print.
More than ten vehicles through the bays every week.
Available while your vehicle is with us.
Fleets, machinery and boats that cannot come to us.
The team
Miles started Vinyl Wrapz and built it into what it is. Ogi runs the shop and will look after your car from the first call. Behind them are highly skilled installers, certified by the major film brands.
Founder
Founded Vinyl Wrapz and built the workshop around his own standard. More than 25 years hands-on with film. Runs the business day to day, gets on the tools whenever he can, and spends the rest of his time finding and training the next installers and keeping Ogi and the team on their toes.
Shop manager
Runs the workshop and every job in it. Ogi is the one you talk to about your car, the one who knows what it needs and how it should be done, and the one who looks after you from the first call to handover.
Installers here are specialists. Each one works in the discipline they are best at, whether that is paint protection film, colour change, commercial print and signage, or boats. They are highly skilled professionals, trained and certified by the major film brands.
Apprentices learn on our own vehicles, never on yours. Every job is checked panel by panel under inspection lighting before it is handed back.
Colour change, paint protection film, boats, printed livery, detailing, prep and design, all from the same floor.
In numbers
★★★★★
Good old fashioned customer service with faultless perfection in what they do! Very happy customer!
★★★★★
From start to finish, the service was professional, friendly and genuinely focused on delivering a quality result.
★★★★★
Couldn't be happier with the team at Vinyl Wrapz. From start to finish, the experience was seamless and professional. We had two vehicles wrapped and the quality of workmanship is outstanding.
What comes through the door
Daily drivers and prestige cars, work utes and full commercial fleets, dealership stock and boats on trailers all come through the workshop. The one-off projects below are the ones people still ask us about.
The jobs that start with a phone call asking whether it can even be done. Photos and the full stories are on their way.
Installed at sea, with a helicopter transfer to get there.
Photo coming soon
The same self-healing film we fit to bonnets, panel by panel.
Photo coming soon
Built for a drinks launch and photographed everywhere it parked.
Osborne Park
The workshop is minutes off the Mitchell Freeway, about ten minutes from the Perth CBD and an easy run from the northern and western suburbs. Most customers drive in from across the Perth metro area. For fleets, machinery and boats that cannot come to us, we install on site wherever in Western Australia the job takes us.
We look at the paint together and put film samples on your own panels, not on a swatch card.
If you are choosing a colour, we can fit a sample on the car and you drive it for a few days before you commit.
A $500 deposit secures the dates and the material for most jobs, and there are courtesy cars while yours is with us.
Prepared by the Vinyl Wrapz team and last updated on .
The short version of what we get asked at the counter. The full set is on the FAQ page.
Vinyl Wrapz is a family-owned Perth business founded by Miles, who has more than 25 years of hands-on wrapping experience. It runs from one purpose-built workshop with two divisions, a paint protection film division and a fleet division, with the main workshop at 18 Rowallan Street, Osborne Park. Ogi runs the shop, and the installers are full-time specialists who each work in one discipline.
Yes, and we would rather you did. The workshop is open Monday to Friday, 8am to 4pm. Bring the car, see what is in the bays, and put film samples on your own paint. If you are choosing a colour, we can fit a sample on the car so you can drive it for a few days before you decide. You do not need an appointment to have a look, but booking a consultation means one of our specialists is free when you arrive.
A specialist in that type of job. Paint protection film, colour change, commercial print and signage, and boats each have their own installers, highly skilled professionals trained and certified by the major film brands. Apprentices do not install film on customer vehicles. The person who quotes your job plans it, and every panel is checked under inspection lighting before the car goes back to you.
For wraps and paint protection film we fit STEK, Avery Dennison, Arlon, KPMF and 3M, chosen by finish and by how they hold up in Perth sun. We are an Avery Dennison ICS certified installer, which means Avery's warranty program stands behind our installations as well as the film. You know which film is going on your car before we start.
Call the workshop. A lifted edge or a bubble is usually quick to sort, and we book it straight back in. Paint protection film gets a complimentary check-up one to two weeks after the install, every car leaves with a written care guide, and the film warranty is registered with the manufacturer on top of our own workmanship guarantee.
Book a time, bring the car, and see the film on your own paint. If you would rather talk first, call the workshop.
