Ultimate PPF Protection - Aston Martin DBS 770 Ultimate Full PPF

Aston Martin DBS 770 Ultimate – Full PPF Installation

Supercar Protection | Ultra-Exclusive Vehicle Wrap | UPPF P20 Nano Film | Vinyl Wrapz Perth

Protecting one of only 300 in the world — with precision, discretion, and zero compromise.

When your client brings you an Aston Martin DBS 770 Ultimate, you clear the workshop floor, tighten every process, and prepare for perfection. This isn’t just any vehicle. It’s a supercar that represents the pinnacle of Aston Martin’s engineering — a 5.2L twin-turbo V12 masterpiece, wrapped in carbon fibre, and built for collectors, enthusiasts, and investors alike.

With only 300 coupes produced globally, and this one being imported from Sydney to WA, the stakes were high from the moment it arrived. Our job? Complete full body PPF coverage, including the rare carbon elements, using UPPF P20 Nano 10-Year Warranty Film.

The challenge? Treating every surface — painted or not — as irreplaceable. Because in a car like this, there are no second chances.

The Vehicle: Aston Martin DBS 770 Ultimate

This model isn’t just an Aston — it’s the Aston. The final iteration of the DBS line, the 770 Ultimate is a 770 horsepower beast with a massive 900Nm of torque and a sound profile that shakes the ground.

Every surface on this car has intent:

  • The bonnet, roof, and rear diffuser are full exposed carbon fibre
  • The sills, bumpers, and canards are sculpted for aero
  • The paint finish is ultra-deep, reflecting the luxury finish Aston Martin is known for

This DBS came straight from Sydney, brought to Perth by an owner who understands the value of protection — not just against road debris, but for long-term resale value and collector integrity.

Wrap Objective – Every Surface, Seamlessly Protected

This wasn’t a typical supercar PPF. The goal wasn’t just to protect visible paint — it was to wrap everything:

  • Painted panels
  • Carbon fibre bodywork
  • Front and rear light surrounds
  • Door jambs and tight-edged creases
  • Splitters, lips, diffuser blades, and functional vents

UPPF P20 Nano film was chosen for its industry-leading clarity, resistance to yellowing, and hydrophobic topcoat that reduces grime and staining over time.

Film Used: UPPF P20 Nano

We selected UPPF’s P20 Nano Series for several reasons:

  • 10-Year Warranty – offering peace of mind for long-term protection
  • Self-healing surface – scratches and swirls disappear with heat
  • Nano-ceramic topcoat – excellent gloss retention and water resistance
  • Ultra-clear composition – keeps metallic flake and carbon detail fully visible
  • Flexible film – better conformity over complex curves and carbon seams

This film is built for owners who value invisibility with performance. Once installed and cured, it’s nearly impossible to see, even on close inspection.

Installation Highlights

This was one of the most detail-driven installations we’ve done. Supercars like this leave no margin for error — every piece of film had to be templated, pre-aligned, and installed with extreme precision.

Special touches included:

  • Wrapped carbon bonnet vents using segmented panels to avoid distortion
  • Individual coverage of diffuser blades with pre-cut edge reliefs
  • Custom stretch across multi-crease door sills
  • UV-sealed edges using UPPF’s matched edge-lock technology
  • Full badge and hardware removal where possible, reinstalled with OEM spec

This was not a one-day job. It required:

  1. 2 days of full surface prep
  2. 3 days of staged installation
  3. 1 day for final inspection, edge reheating, and post-install wipe down

Prep Process & Challenges

Cars like this arrive looking perfect — but they aren’t always install-ready.

Key steps we took:

  1. Degreasing factory coatings: Even new cars are delivered with waxy transport protectants. These must be fully stripped to ensure PPF adhesion.
  2. Clay bar and spot decontamination: Even micro-contaminants can lead to bubbles under film.
  3. Panel edge disassembly: Some trim elements were loosened or removed to allow for hidden edges and a cleaner finish.
  4. Custom lighting: We used colour-matched workshop lighting to identify high-gloss distortion zones during install.

Specific Challenges:

  • Carbon fibre edge transitions require controlled stretching to avoid lift
  • Front splitter and rear diffuser included floating sections not bonded to main bodywork — requiring floating tension installs
  • Panel access was limited on some lower edges — requiring underbody ramps and double tech assistance

Everything had to be installed with the confidence that this car might appear at shows, in publications, or in resale listings where any error is magnified.

Why Full PPF?

At this level, Paint Protection Film isn’t optional — it’s an expectation.

A car like the DBS 770 Ultimate is both a performance vehicle and an investment. With so few in the world, future resale value is directly linked to condition, and one paint chip can subtract thousands.

Full PPF protects against:

  • Stone chips
  • Sandblasting from WA roads
  • Road grime, bug splatter, and brake dust
  • Clear coat fading from UV
  • Swirl marks during washes
  • Abrasions during maintenance or storage

And with high-end films like UPPF P20 Nano, it adds gloss, clarity, and hydrophobic coating without changing the original finish.

Why Vinyl Wrapz Perth?

At Vinyl Wrapz, we treat supercars like the investments they are. Whether it’s a DBS, a Ferrari, or a McLaren, we deliver professional-grade protection that preserves your vehicle — and your peace of mind.

Why owners trust us:

  • Certified PPF installers with extensive high-end experience
  • Dust-controlled environment for zero contamination installs
  • Expertise in carbon fibre panel wrapping
  • Premium products only — UPPF, Suntek, and trusted global brands
  • Tailored installs for rare, imported, or collector vehicles

From exotic curves to intricate vents, we cover every inch with confidence.

Why Full PPF Is Essential for Supercars

For vehicles like the DBS 770 Ultimate, supercar protection is a smart investment:

  • Preserve value by eliminating paint chips and UV fading
  • Invisible coverage — no compromise on looks or finish
  • Improved resale confidence — buyers prefer protected vehicles
  • Easier to clean — thanks to hydrophobic, stain-resistant coating
  • Self-healing — no more worrying about light swirls or scratches

It’s peace of mind with performance.

Project Summary:

  • Client Vehicle: Aston Martin DBS 770 Ultimate (1 of 300)
  • Imported From: Sydney
  • Engine: 5.2L Twin-Turbo V12
  • Service: Full vehicle PPF wrap
  • Film Used: UPPF, 10-Year Warranty
  • Highlights: Carbon bonnet, carbon roof, extreme panel complexity

Ready For Elite Best Premium Ultimate PPF Protection

Take the first step towards unparalleled car care by filling out our detailed PPF price enquiry form. Tailored to your vehicle’s specific needs, our expert team is ready to guide you through selecting the perfect protection solution.